Product Introduction
OTS-6000 Series OTDR is a multi-functional optical measurement instrument that integrates functions such as OTDR, visual fault locator, optical power meter, light source, insertion loss tester, and event map. It can be loaded with communication auxiliary functions such as GPS module, WIFI module, IOT module, and Bluetooth module. Combining touch screen and buttons, it is an instrument with very simple and user-friendly operation. It is a powerful assistant for optical cable construction, project acceptance, and on-site emergency repairs. Whether you are accustomed to high-end instruments of imported brands or are a novice who has just started, it is believed that this instrument will be your most intimate choice.
feature
parameter
| Wavelength（max:5λ） | Single mode | Multi mode |
| 1310/1490/1550/1610/1625/1650nm | 850/1300nm | |
| Dynamic range (dB) | 26~42 | 22/26 |
| Dead zone | 1/4m | 2/8m |
| Pulse width | 3ns/5ns/10ns/20ns/50ns/100ns/200ns/500ns/1us/2us/5us/10us/20us | 5ns/10ns/20ns/50ns/100ns/200ns/500ns/1us/2us |
| Range | 100m/200m/500m/2km/5km/10km/20km/40km/80km/120km/250km | |
| Minimum sampling resolution | 5cm | |
| linearity | ≤0.05dB/dB | |
| Loss resolution（Unit：dB） | 0.001dB | |
| Distance resolution（Unit：m） | 0.01m | |
| Distance accuracy | ±(1m+Range×0.05%+Sampling resolution) (Regardless of the refractive index) | |
| Data memory | 16G SD card(>100000 data) | |
| Interface | USB(Type A×1,Type B×1)，Micro SD card | |
| Battery | Single battery capacity:7.4V/2500mAh X2(Two batteries) | |
| Temperature/Humidity | Environment temperature：-10℃~+50℃;Storage temperature：-20℃~+70℃
≤95%（No condensation） |
|
| Size/wight | 215×155×68mm / 1.1kg(including two batteries)，package weight：3kg/set | |
| module | Parameter | Note |
| VFL | 10/20/30/50mW | Standard configuration:10mW |
| OPM | A：+10~+70dBm；C：+26~-50dBm | Standard configuration:A |
| Laser source | Output power:-5dBm±2dB;Frequency:270/1k/2k Hz | Only single mode |
| Event map | Standard configuration | |
| Loss testing | OPM+LS | Standard configuration |
| Fiber Inspection | Can be externally connected to a 400x USB end face detector | Optional |
