SI-01 Longitudinal Optical Cable stripper the diameter of the standard optical fiber cable or cable to be stripped should be between Φ12-Φ25mm. Adjust the depth of the blades according to the wall thickness of the optical fiber cable or cable; the two blades on the tool can be adjusted simultaneously. Turning clockwise makes the blades shallower, and turning counterclockwise makes the blades deeper. There are 4 positioning notches for one full rotation of the nut, with each notch being 0.25mm. Press the optical fiber cable or cable into the adjusted tool (the length of the stripped part of the optical fiber cable or cable depends on the requirement), firmly hold the tool handle with both hands and pull it towards the end of the optical fiber cable or cable to achieve longitudinal stripping. Optical fiber cables or cables with a diameter of more than Φ17mm are relatively hard; if they cannot be stripped in one go, rotate the tool in one direction and strip again.