K1/K2/K3 Vertical bundle tube stripper

Product model not provided.

Introduction：

■ K1 adopts a central axis design, and the double cutting grooves make the product last longer;
■ K2 / K3 adopt an open structure, which can be operated by closing the upper and lower parts to clamp, pressing and pulling hard;
■ The outer diameter of the loose sleeve for K1 / K2 single-core bundle tube cutter: 1.5~1.9 mm, 2.0~2.4mm, 2.5~2.9mm, 3.0~3.3mm;
■ The stripping diameters of K3 are 4.5mm/6mm/7mm/8mm/11mm respectively, and wires with the above diameters can be stripped;

Online Message

Details

feature

parameter

Product Introduction

K1/K2/K3 Vertical bundle tube stripper，suitable for longitudinal stripping of bundle tubes during outdoor optical cable cutting and splicing. It is lightweight, small in size, and easy to operate. The stripping size is preset at the factory, requiring no adjustments. The blade is made of a special superalloy, with a sharp edge.